A Handmade Christmas Part 1: LeMoyne Star Tree Ornaments

 

Growing up we had an artificial tree most years. I remember one Christmas we had a live one and it shed horribly. I was given leg warmers that year (it was the 80s) and I still remember putting them on after leaving them on the floor and being pricked by what seemed like hundreds of tiny needles. It took forever to get the pine needles out. 

My mum dressed the tree every year and the process was always the same. Lights were first and had to be tested. Ours were coloured with spikey lanterns covering the bulbs. Invariably there would be a loose bulb which caused the whole string to not work, thus began the tedious task of twisting every bulb to find the offending one. After that was tinsel. Tinsel first then the lights, so the lights didn't cover the gaudy sparkly garlands. This seemed to take a while because my mum was a real stickler for making sure there were no gaps. Then came the fun bit, adding the ornaments, but there was a system to this as well. Larger ornaments at the bottom, smaller at the top.

I decided to rebel at little when dressing my tree and put the ornaments on before the lights. I could almost see my mum sighing and shaking her head as I awkwardly pulled the string of lights around the tree, knocking off my carefully placed baubles. There was obvious method in her madness!

In years past our tree was inspired by peacock colours which meant deep teal, magenta and I even added peacock feathers. But this year we decided on a mainly red and white colour scheme. I have to say I prefer it. Concerned I wouldn't have enough ornaments in the right colours, I decided to make some and chose the lovely traditional LeMoyne star patchwork design. I made this using my favourite paper piecing method since they are quite small and they really don't take long at all to make this way. 

You will need

LeMoyne star template (to be added!)

Fabric in two patterns

Stiff cotton canvas or heavyweight stabilizer

Matching ribbon cut to 4 inches

Card stock

Scrap paper

Glue stick

Pins

Multi-purpose thread in a contrasting color to the patterned fabric

Sewing thread in a color to match the patterned fabric

Needle

Pinking shears or regular scissors

1. Cut out the template and glue onto card stock to make a re-usable template
2. Draw 8 shapes onto scrap paper and cut out
3. Pin 4 of these slanting to the LEFT to the wrong side of ONE of the patterned fabrics allowing about 1/2 inch between each shape and the edge of the fabric
4. Cut around the shapes with a 1/4 inch seam allowance
5. Repeat steps 3 & 4 with the remaining 4 shapes point to the RIGHT with the other patterned fabric
6. Fold seam allowance over the paper shape and tack stitch the seam all the way round with the contrasting thread
7. Do this for all eight
8. Take one each of the shapes in different patterns
9. Put the front sides together (so if you flip them either way you can see the seam allowance and paper underneath) and sew a long edge with matching thread using whip stitch
10. When done, take another shape and sew it to one of the of the short edges of the two shapes, ensuring the pattern is alternating (see the photos above)
11. Do this for FOUR shapes so that you have half a star with a straight edge
12. Repeat steps 8 - 11
13. Sew the long edges of the two halves together with the right sides facing each other, using the matching thread and whip stitch
14. Remove the tacking stitches ad papers (save them for your next star!)
15. Pin the wrong side to the canvas or stabilizer, with the seam folded under and sandwiched betweed the canvas and star
16. Fold your ribbon into a loop
17. Pin between the star and canvas (see photos)
18. Sew with running stitch in matching thread, I intentionally made the stitches long to give the stars a primitive look
19. Trim the excess canvas or stabilizer with pinking shears or normal scissors
20. Hang on your tree or wreath!

Repurposed Flour Sack Laundry Bags

This project is so easy and requires so little skill, I am not even sure I can call it a craft project. Yet it is the simplest ideas that are often the best. These laundry bags are the perfect size for baby clothes and because they hang up save you much needed space.

I have a love of vintage flour sacks, the designs are usually fun and random, I mean look at the ones below. I bought these at a local vintage store for $7 each, but you can get them cheaper (and more expensive!) from EBay or Etsy. I personally would never pay more than $10 for one and even then it would have to be a pretty special flour sack!

You also need an embroidery hoop. I used an 8 inch because I happened to have one lying around. You could easily stretch to a 9 or 10 inch.  These sacks were  inches in width.
Ok here's the hard part :)

- get you embroidery hoop and separate the two pieces 

- put the hoop over the sack at the top

- open up the sack and fold a couple inches of the opening over the loop

- play around with how it gathers so that you can see the picture most clearly

- put the outside piece of the embroidery hoop over the opening with the screw at the back

- tighten the loop

I found that the screw sat perfectly on my door hook but you might need to add a loop depending on where you hang the bag.

You may wonder once it's full whether the bag might slide out of the hoop. I checked, it doesn't. The friction of the cotton and wood from the hoop create a nice grip and you just have to make sure you fold enough of the opening over. See below.

I plan to make a second one so that I can divide light and dark laundry. I will post more ridiculously easy flour sack projects soon!

Creating a Handmade Childhood: Patchwork Baby Quilt

The first baby project to be completed! It's a crib 'quilt'. Technically it's not a quilt because I didn't quilt it. It's a good feeling to create something for the little sprout, it's as if we are building a welcome for her.

The pattern is from Joann Fabrics. I will warn you that the instructions are a bit vague so if you're new to quilting, it may be difficult to follow. I used a natural grey linen to incorporate the zakka aesthetic I want for the nursery. I will be using the same linen for throw pillows and other accents which I hope will give the nursery some feeling of unity while allowing for me to play around with prints and patterns.

The fabric came from all over the place, Etsy or Fabric.com are good places to find some that may either be similar or indeed the same. The design of multicolored Spirographs is from Ikea. Once the quilt was assembled, I backed it with a type of quilting batting that doesn't need to be covered, you can get it here. It's beautifully soft and makes for a lightweight quilt.

Window Treatment Solution # 1

Problem: Kitchen window needs a blind. Cheap blinds are ugly.
Solution: Cover blind with fabric.
I used this tutorial: http://jacquelynnesteves.com/featured/fabric-covered-window-shade-tutorial/
I got my fabric here: http://www.kitschfabrics.com/kitsch/Home.html

TV Project 1: Kimono Coasters

Kimono silk is just something I can't resist, it's sexy makes me think of geisha.  It's also awkward to work with, since it is so sheer and thin.  I like to always have a project on the go that I can do while watching TV. So this is my TV project du jour.   

NOTE: The instructions for the rosettes can also be used to make the ones you saw on the boudoir pillow.  Imagine a pillow with kimono silks! Ooh la la, get your Valentine's horny on!

Level: Beginner
Time: 2 hours per coaster
Cost: $2 (approximately
Materials and Tools:
Hexagon template, size: 1 inch per side
Kimono silk scraps (or scraps of cotton quilt weight fabric) in three different patterns in similar colors.
1/2 yard of grey felt
Thread in contrasting color and matching color
Pins
Scrap paper
Needle
Iron
Scissors for fabric
Scissors for paper

- First cut seven hexagons out of scrap paper
- You are going to need one hexagon from one patterned fabric then three each from two additional patterns
- Place your paper hexagon onto the wrong side of your chosen fabric and pin in place
- Cut around the hexagon with a quarter inch seam allowance
- Fold the fabric seam over the paper and tack all the way round with the contrasting thread
- Remove pin
- Do this with all seven hexagons
- The one hexagon cut from a different fabric to the other six is the center of the rosette
- Take this hexagon and a hexagon of another pattern place them with right sides facing each other and sew the seams together with whip stitch
- Continue doing this until you have all six hexagons of alternating pattern sewn to the center one
- Iron your rosette so the seams are nice and sharp
- Remove the paper from the center hexagon and pin to the felt
- Cut out the felt so that the rosette is pinned to smaller piece of felt with some excess fabric around it.
- Remover one paper from an outer hexagon and pin to the fabric with the seam folded under
- Sew the edge with a running stitch
- Do this hexagon by hexagon until all edges are sewn to the felt
- Trim off the excess felt
- Press with iron
- DONE

Pimping My Boudoir 2: Throw Pillow

It's true, throw pillows are probably the cheapest and most effective way of giving your decor a facelift!  My sister-in-law is obsessed with them and has passed that obsession on to me.  I don't have a zipper foot for my sewing machine yet so decided to do a sleeve instead.  It worked well enough, but in the future I would make the overlap larger as the pillow is a little visible at the back.  Anyway, this is all good practice for making items to sell. 

New Blog Guys!

I have been gathering various how to projects off the internet for a while and decided that maybe I should share them with you crafty people. Hence the birth of Craft Digest, I have been trying to add tutes at least once a day. So far there have been stitching tutes, bookbinding and there are more coming.

New Ways with Patchwork: Clutch Bag Tutorial Part 1

I originally found this design in a book my friend has on patchwork bags, I LOVE fan patchwork and it's the perfect project for my pending nuptials. Months back when we first got engaged, I went mad buying kimono silk with the idea of maybe using them for the wedding. Well here's my chance. The bag is just the right size for lipstick and the like.

I amended the pattern to my own method using paper piecing which I love. It is such a small project that it won't take long and you can use very small amounts of fabric.

You will need:

• Scraps of fabric (size depends on how big the purse will be)
  Scrap paper for the paper templates
  Batting 2oz for a 24cm long bag


• Inner fabric as above


• Thread (sewing and quilting thread)


• A zip

Here's part 1

First draw a circle as big as you want to clutch to be. Mine was drawn with a compass set to 12 cm.

Cut the circle out. To make the fronds you need to divide the circle into 16 equal segments. Do this by folding the circle eight times, mark the folds with a ruler and pen. Set a compass at 4 cm and draw this smaller circle in the centre of larger circle. Cut the large circle in half. Then cut out the semi-circles and then cut the 16 segments out - picture below.

The semi-circles you don't need but the fronds are for your paper piecing. Pin them to the wrong side of your fabric and cut them out with a 1/4 seam approx (sometimes use more). You will see I used pinking shears, this was to stop the fabric fraying - very common with some silks.

When you have cut out the fabric pieces, use a contrasting thread to tack the sides over the paper in biggish stitches. After, you can remove the pins.

Use the pieces to decide on your combination then take the two first put them right side to rights side, with the paper and fold seaming showing outward and whipstitch together. Continue until you have two semi-circles.

Part 2 will come when I do it myself - either tomorrow or day after!